0755-26690024
nRF24LU1P
DataApplicationSelectionCharacteristicOverview

● nRF24L01+ compatible RF transceiver
● Worldwide 2.4 GHz ISM band operation
● Up to 2 Mbps on air data rate
● Enhanced ShockBurst™ hardware link layer
● Air compatible with nRF24LU1, nRF24LE1,
nRF24L01+, nRF24L01, nRF2401A, nRF2402,
nRF24E1 and nRF24E2
● Low cost external ±60 ppm 16 MHz crystal
● Full speed USB 2.0 compliant device controller
● Up to 12 Mbps USB transfer rate
● 2 control, 10 bulk/interrupt and 2 ISO endpoints
● Dedicated 512 bytes endpoint buffer RAM
● Software controlled pull-up resistor for D+
● PLL for full-speed USB operation
● Voltage regulator, 4.0 to 5.25V supply range
● Enhanced 8-bit 8051 compatible
microcontroller
● Drop-in compatibility with nRF24LU1
● Reduced instruction cycle time
● 32-bit multiplication-division unit
● 16 or 32 kbytes of on-chip flash memory
● 2 kbytes of on-chip SRAM
● 6 general purpose digital input/output pins
● Hardware SPI slave and master, UART
● 3 16-bit timers/counters
● AES encryption/decryption co-processor
● Supports firmware upgrade over USB
● Supports FS2 hardware debugger
● Compact 32-pin 5x5mm QFN package

ModelProcessorRAMFLASHSupported protocolsPackageDimensions(mm)
nRF24LU1P-O17Q3280512kB+256B16kB+1Kb( OTP)2.4GHz private protocol、USB2.0QFN5×5
nRF24LU1P-F16Q3280512kB+256B16kB2.4GHz private protocol、USB2.0QFN5×5
nRF24LU1P-F32Q3280512kB+256B32kB2.4GHz private protocol、USB2.0QFN5×5

FileDescriptionSizeUpdate timeTimes
nRF24LU1P_Product_Spec_v1_1.pdfnRF24LU1P product specification1.79 MB2016-11-0435
Copyright © Xuntong Technology All rights reserved